FSUV-6012 LED UV flatbed printer



    Model                                             FSUV-6012
    LED-UV Function UV lamp system 6 Power degree adjustable system
    UV Power 200W
    UV lamp life time 50000hours
    UV light wavelength 390-400nm
    Light power 500mw/w
    Cooling type Water circulation
    Cooling adjustment Automatic on/off between 25-30c
    Control Software FocusRIP-UV V3.5.0
    Repeat printing precision Overlap small than 0.1mm
    Head maintain Head clean during/after printing, Keep-wet system when idle.
    Ink system Ink damper refill system
    Max. printing size A3+: 600mm*1200mm
    Print head One/two Epson DX5 piezo head with 1440 nozzles
    Print color CMYK+WWWW / 2*CMYK / 2*CMYK+8*W
    Print direction Unidirection / Bidirection
    Print speed A31440dpi/ 45s with two heads
    Max. media thickness 12CM
    Max. media weight 50KG
    Max. printing resolution 5.1sqm/hour  under 1440*720dpi
    Ink volume 220ML
    Ink type UV environmentally ink / Eco solvent ink/dtg ink
    Height adjustable Manual / Automatic
    Print head protection Intellective automatic detect
    Working power 110-220V 50-60HZ 300W
    Interface USB2.0 /IEEE1394
    System require Windows XP / Vista/ Win7 / MAC I Linus
    Working enviroment 25-30C, 50% Humidity, Dust free
    Net weight/Gross weight 90KG/110KG
    Printer size 155CM*278CM*135CM
    Packing size 215CM*335CM*190CM


    Technical features:

    1. 60*160cm table size ensure you can print on any media with max. 60*120cm printing area.

    2. Fast printing speed by print on A4 size with full color only need 64 seconds.

    3. Easy operation panel can control the flatbed for Backward, Foward, Up, Down, Pause/Stop, Online/Offline,  ink changing, current position, heating, vacuum fan, error alarm to let you operate the machine more convinence

    4. 2880*1440dpi max. printing resolution can let you print on any material with best result.

    5. Support max. material thickness 12cm. expand more printing area for customer.

    6. High quality UV curing system with LED UV lamper which mounted with 48pieces LED UV light, can get to the working power immediately without waiting, also the LED light cost less power and harmless for human health.

    7. Automatic water circulation cooling system can make the LED UV lamp working with constant temperature to protect the lamp and print head.

    8. Print with high quality UV curing ink for all media with white and color ink can let you get a prominent, embossed printing result.

    9. ink chanel to ensure you get a good color rapid result and get a better white ink density while print on dark media.

    10. Low cost of printing image, less procedures of production. It is only cost 0.5ml ink per A4 size printing,

    11. Refill ink bottle with ink damper instead the ink cartridges can prevent the UV ink curing by the enviroment light to cause head clog.

    12. Newest external ink chips reset system can prevent the problem that chips can not be reseted or detected as the traditional chips mounted on the catridges.


    13.Servo motor with adjustable driver can let the Y axis flatbed moving get repeat printing precision overlap small than 0.01mm. Compare with the step motor, the servo motor can achieve the recycle motion diagnose. It can make the printing very stable and got higher resolution printing. even 5# words can be printed out clearly.



    14. Industrial PLC control system is the heart of printer,  Before we use the single chip control system, so if any problem will cause the print error, now we use the PLC control system, It is a special alone control center, can dispatch all the working command to different electronic parts separately , and get worked information back. Then process and check itself, also it have self protection problem. Even any problem happen, the PLC will stop for protect the printer and prevent the print head, electronice board and other electronic parts damage.  So it is easy to find out the problem and repair it even any  problem happend.


    15. Strong mechanial motion build. #20-05 ABBA good rigid ball screw can driver the flatbed moving more stable with high precision, extend the working life of whole printer.

    16. Both side mounted with Hiwin linear rail can reduce the working noise but improve the motion procison also.

    17. Waste ink tank with dual tube out  can let you maintain the print head, clean print head and load ink faster and easier.

    18. Intelligent Anti scratch printhead system, Recognize the flatbed by red ray sensor to ensures the life of printhead last longer which also reduces the cost of printing

    19. Good color managment by FocusRIP to let you get a good halftone result, can adjust the ink limit, white ink layer type, ink  dot type, ink chanel setting optional.

    20. Support white ink printing, you can print with white ink on the dark media by our FocusRIP easier.



Home | Our products | Most Popular | News & Events | Support | About us | Contact us | Mega-Jet |

Copyright by Shanghai Focus digital technology co., ltd China Direct to Garment Printer, DTG Printer,T-shirt Printer, manufacturer supplier